What's your Material Flow Control Challenge?
We've got the Solution!
CHALLENGE 1: Control the flow of Recycled Shingles from 1 ton per hour to 20tph most accurately.
SOLUTION: The EZ Flo Continuous Weigh Loss Control Scale corrects your tach volumetric signal for continued accuracy with no hardware/software changes to your existing system. Peoria, IL
CHALLENGE 2: Accurately control the flow of an additive as low as 3 lbs per minute.
SOLUTION: The EZ Flo Continuous Weigh Loss Control Scale corrects your tach volumetric signal for continued accuracy with no hardware/software changes to your existing system. Des Moines, IA
*Note: Load cells are positioned within the colored circles below
CHALLENGE 3: Accurately control the flow of fiber at 20 lbs/minute.
SOLUTION: The EZ Flo Continuous Weigh Loss Control Scale corrects your tach volumetric signal for continued accuracy with no hardware/software changes to your existing system. Milwaukee, WI
Let us introduce to you the
Ez-Flo Weigh Loss Scale Controller!
The EZ Flo Weigh Loss Scale Controller, continuously compares the volumetric signal that your controls are used to, with what is actually depleting from the hopper.
The system "wakes up" when the cold feed belt starts turning.
Notice the Tach Input signal is different from the Tach Out.
This indicates that the system is correcting the signal to the blending control, to what it should be.